QUINDOS CamshaftMTW-510-CAM-001
Measurement of Cams and Camshafts on a Leitz Coordinate Measuring Machine or on Camshaft Gages.
The QUINDOS option Camshaft is used to measure, calculate and evaluate cams and camshafts on a precision coordinate measuring machine.
It can also be retrofitted to camshaft gages or a camshaft measuring machine of other manufacturers.
It can also be retrofitted to camshaft gages or a camshaft measuring machine of other manufacturers.
The measurement of camshafts with QUINDOS is now easier than ever:
after entering the camshaft parameters from the drawing the travel path of the Coordinate Measuring Machine (CMM) as well as all probings and scan lines required for the inspection are generated automatically.The nominal data must be provided as "angle over stroke".
The program evaluates the following camshaft features :
- Cam base circle
- Stroke for various followers
- Stroke of a translatory follower (Barrel-follower)
- Speed and acceleration of the follower
- Error step (max. error variation) within a defined range
- Cam angle
Camshaft inspection without Rotary Table
With a Leitz Coordinate Measuring Machine and QUINDOS software a rotary table is not required for the inspection of camshafts, i.e. many camshafts can be fixed and measured on a pallet. This means a drastically increased throughput compared to conventional camshaft gages resp. single purpose camshaft measuring machines.
Leitz Camshaft Gages and Measuring Systems: fast, precise and cost-efficient!
