QUINDOS Shaving GearMTW-510-SHV-001
Inspection of shaving gears on a Leitz Coordinate Measuring Machine or a Gear Checker.
The option Shaving Gear provides the tools for the inspection of shaving cutters on a high precision coordinate measuring machine or a gear checker.
The measurement of shaving gears with QUINDOS is as easy as the measurement of normal gears: after entering the shaver parameters the travel path of the Coordinate/Gear Measuring Machine as well as all probings and scan lines required for the inspection are generated automatically.
Leitz Gear Measuring Technology turns your Leitz Coordinate Measuring Machine into a high performance Gear Checker!
Shaving gears can be measured on a Leitz 3D Coordinate Measuring Machine by using a star styli configuration, similar to the inspection of normal gears. With QUINDOS there is no rotary table required for such measurements and therefore several shavers can be mounted on a pallet and measured in one go. This leads to a tremendously increased throughput compared to a conventional gear checker.
Following features of shaving gears can be evaluated:
- Helix
- Profile
- Pitch
- Runout
- Corrections
Due to the tight tolerances of shaving gears, only a high precision coordinate measuring machine or a gear checker with a very small probing error P and continuous scanning capability (i.e. Leitz PMM-C 700 P) should be used for such measurements.
