QUINDOS Shaper CutterMTW-510-SHP-001
Inspection of shaper cutters on Leitz high precision Coordinate Measuring Machines and Gear Inspection Systems.
The cutting face can be conical or steped.
Among others this QUINDOS package evaluates:
- Axial runout of the cutting edge
- Radial runout
- Tooth thickness
- Angles at the cutting edge
- Pitch
- Profile
- Helix
QUINDOS Shaper Cutter on Leitz Measuring Machines is as easy to operate as dedicated gear inspection systems:
The moving path of the Coordinate Measuring Machines with all probing points as well as all scan-lines is generated automatically.
All shaper cutter measurements on Leitz Coordinate Measuring Machines / Gear Inspection Systems are executed using a star-shaped probe cluster.
A rotary table is not required for the inspection of such cutters. Therefore various shaper cutters can be mounted and inspected automatically on pallets. Thus providing a much higher throughput compared to conventional gear inspection systems.
Due to the tight tolerances of shaper cutters, only high precision 3D Coordinate Measuring Machines with a very small probing error P and continuous scanning capability (i.e. Leitz PMM-C 700 P) should be used for such measurements.
Gear Inspection Systems by Leitz: fast, precise and cost-efficient!
